Product Overview
MK fully hydraulic exploration core drilling rigs are compact crawler-mounted machines developed for mineral exploration and wireline coring. Their hydraulic power heads support high-torque and high-speed drilling, while the balanced-pressure system helps control bit pressure in complex formations and deep holes.
Key Features
- Accurate coring for representative geological samples
- Hydraulic power head for torque and speed control
- Centralized electro-hydraulic controls
- Automatic pressure-maintaining drill-pipe clamp
- High-pressure mud-system option for high-solids drilling fluids
Applications and Options
Mineral exploration and wireline coring in hard rock and complex formations. Confirm core size, target depth, geology, transport access and mud-system requirement.
Review the listed mud pump, crawler type and remote-control configuration for the selected variant.
Planning An Enquiry For MK-CORE-1000-1 Fully Hydraulic Exploration Core Drilling Rig
The following information supplements the product record. It is planning guidance, not additional model specifications or a confirmed equipment match.
Start With The Required Sample
Specify the core-sampling objective, required core size, target depth and planned hole direction. Core and RC sampling supply different sample forms; they should not be treated as the same enquiry simply because both are used in exploration.
Read Capacity With Its Stated Basis
Check the rod or drilling-system basis of any listed capacity. Identify tooling, circulation and handling requirements separately. Do not infer another size capacity from a single depth figure or a model name.
Prepare The Exploration Scope
Include the formation information, site access, working area, proposed sampling programme and existing tooling. Request the specific rig configuration and a list of rods, barrels, bits and supporting equipment to be included. Recovery or sampling results require their own site-specific assessment.
Related Planning Resources
Full Specifications
Confirm the final configuration and current specification sheet with our team before ordering.
Swipe the table to view all columns. Keyboard users: focus the table and use the arrow keys.
| Specification | Value |
|---|---|
| Model Reference | MD1000-1 |
| Weight (t) | 8.2 |
| Transport dimensions (mm) | 4500x2100x2500 |
| Working dimensions (mm) | 4100x2700x7000 |
| Drill angle (°) | 45-90 |
| Slide compensation (mm) | 800 |
| BTW core depth (m) | 1400 |
| NTW core depth (m) | 1000 |
| HTW core depth (m) | 800 |
| Power-head lift (t) | 19 |
| Power-head thrust (t) | 11 |
| Rotation (rpm) | 0-1400 |
| Torque (N·m) | 2500 |
| Propulsion stroke (mm) | 2000/3600 |
| Hydraulic system | Main 63/63/25/16; assist 16 |
| Cooling | Water/air cooling |
| Engine | Cummins 132 kW |
| Rope length (m) | 1200 |
| Elevating power (kN) | 24 |
| Hoisting speed (m/min) | 110 |
| Matched mud pump | BW160-10 |
| Crawler | 43-section 350 mm steel |
| Climb angle (°) | 30 |
| Travel speed (km/h) | 3 |
| Remote control | Yes |